Roomba 600 and 700 Series Battery Replacement Guide
The Roomba 500/600/700 families are the workhorses of Australian scheduled cleaning — and the friendliest battery swap in the house. Two or three screws, a lift, a click, done. Here’s how to match your model to the right pack and wake the machine up properly afterwards.
Quick answer
- 500/600-family packs from $32.79 — the Roomba 630 pack is the popular default.
- The 780-era pack (630/780 fitment) is $40.79; a high-capacity 637 pack (3300mAh, 14.4V) is $78.79.
- Same belly-panel swap across the 500, 600 and 700 families — match your exact model on the product page’s compatibility list.
- After fitting: full dock charge, then a complete clean cycle to reset the machine’s battery sense.
Match your model
Flip the machine and read the model number on the underside sticker. Then match it here:
| Your Roomba | Pack | Price |
|---|---|---|
| 500 series | Roomba 500 pack | $32.79 |
| 537 | Roomba 537 pack | $32.79 |
| 600 series (630, 675, 690…) | Roomba 630 pack | $32.79 |
| 630 / 780 era | Roomba 630/780 pack | $40.79 |
| 637 (high-capacity upgrade) | Roomba 637 pack (3300mAh) | $78.79 |
| 80501 / 80601 SKUs | 80501/80601/SP530-BAT | $32.79 |
The 637 high-capacity pack deserves its own note: per its product page it fits a wide run of machines from the 606 through the 980 series — including 670, 675, 677, 680, 685, 690, 890, 960 and 980 — so it’s worth checking even if your model isn’t in the 600 family proper. Its compatibility list and 14.4V/3300mAh rating are printed on that page; verify your model there before ordering.
The swap: four screws, ten minutes
- Flip the Roomba on a towel. Nothing to unplug but the dock — the pack is under a belly panel.
- Remove the battery door screws. Two or three Phillips screws on the 500/600/700 families; keep them on a tray.
- Lift the old pack out by the pull tab, noting the connector’s direction.
- Seat the new pack connector first, close the door, screws back in.
- Dock it and let it charge fully before the next scheduled run — don’t interrupt the first charge.
If the machine beeps an error or refuses to wake afterwards, the reset-and-contacts routine usually clears it: AussieBatt’s Roomba 630 charger error fix walks through the exact sequence, and its Roomba 600 usage tips explain the charge-contact cleaning that prevents most repeat faults.
Making the new pack last
- Clean the charge contacts monthly — dirty contacts cause chronic under-charging that looks exactly like a dying pack.
- Empty the bin and cut hair from the brushes every couple of cleans; a straining motor shortens every cleaning session.
- Keep the dock in the shade; a dock in an afternoon-sun corner cooks the pack through charge cycles.
- Let it complete full charge cycles rather than constant partial top-ups where you can.
The full care routine lives in how long Roomba batteries last, and AussieBatt’s Roomba maintenance guide covers the same ground from the blog side. For the i7 generation, see the i7 ABL-D1 guide instead — different pack, different rules.
Sources: prices and fitments are quoted from the linked battaussie.com product pages (checked 26 October 2026).